The GW Instek PSW30-108 is a programmable lab power supply that is ideal for testing, for example, a Device Under Test (DUT). The lab power supply has Constant Voltage- (CV) and Constant Current- (CC) modes, which are useful for the protection of DUT's. Another useful feature of the PSW series is that it can be combined with other lab power supplies in series or in parallel, to increase the voltage or current respectively. In series a maximum of 2 devices can be connected, in parallel there can be a maximum of 3 devices including the master unit.
The PSW30-108 can supply a maximum voltage of 30V, a maximum current of 108A and a maximum power of 1080W. Furthermore, the power supply has Over Voltage Protection (OVP) and Over Current Protection (OCP) and their levels are adjustable. These functions are very suitable for the protection of DUT's.
The LabView driver and the Data Logging PC software are supported by any available interface. The power supply has active cooling and analog control. Also important is that the slew rate is adjustable.
Power | 0 - 1080 Watt |
Voltage | 0 - 30 V |
Current | 0 - 108 A |
Resolution | 1 mV / 3 mA |
Channels | 1 |
Ripple | CV ≤ 14mVrms & CC ≤ 216 mArms |
Connectivity | USB, LAN, GPIB (optional) |
Dimensions | 214 x 124 x 350 mm |
Weight | 7.0 kg |
The GW Instek PSW30-108 comes including:
Linkview |
(179.58 KB) | Download |
GW Instek PSW-series datasheet |
(938.31 KB) | Download |
GW Instek PSW-series manual |
(5.23 MB) | Download |